Back

2024 Case IH Farmall Small Utility C Series 75C

MoreLess
Limited Time Offer!

Selling Price -
Click for a Quote
No Images Available

Selling Price -

Click for a Quote

HD Certified Pre-Owned
2024 Case IH Utility Farmall® C Series 75CYear 2024Manufacturer Case IHModel Name Utility Farmall® C SeriesTrim Name 75CGeneric Type (Primary) CompactEngine FPTCylinder Liners 4Emissions Tier 4 B/FinalAspiration turbochargedDisplacement 3.4 LEngine Power 74 hpRated Engine Speed 2,300 rpmPTOPTO Power, Rated Engine Speed 64 hp | 540 / 540DrivetrainTransmission 12×12 Power shuttle (wet clutch)Differential Lock MechanicalHydraulicsHydraulic Type Open center | Lower Link End / Stabilizer: Flex ends / Telescopic stabilizersHydraulic Pump 12.5 gpm (47.5 L)Hitch/Type 3-point Category and Draft Sensing Type: 1/2, Mechanical Draft Control (MDC) top link sensingDimensionsWheelbase 2WD/MFD: 86 in. (2180 mm) / 84 in. (2132 mm)Overall Length 2WD/MFD: 153 in. (3884 mm) / 151 in. (3838 mm)Height Minimum (ROPS Folded): 77.6 in. (1972 mm)Overall Height 98 in. (2495 mm)CapacitiesHitch Lift Capacity @ 24 in. Behind Pin (Standard): 3,664 lb. (1662 kg)Fuel Capacity Tank (Cab): 23.8 gal (90 L)WeightsWeight w/o Ballast (Cab/Non-Cab 2WD): 5,622 lb. (2550 kg) / 5,027 lb. (2280 kg) | w/o Ballast (Cab/Non-Cab MFD): 6,239 lb. (2830 kg) / 5,512 lb. (2500 kg)Features MFD Engagement: Electrohydraulic | Axle Front: HD 2WD or MFD with limited slip | Axle Rear: Flange | Diesel Exhaust Fluid Tank: No DEF required | Rear Remotes (Standard): 2drive 4WD
  • 2024
  • Case IH
  • Farmall Small Utility C Series
  • 75C
  • Compact
  • Tier 4 B/Final, FPT turbocharged
  • 74 HP
  • 3.4 L
  • 4-cylinder
  • 64 HP | PTO Speed: 540 / 540/540E | 2,300 RPM
  • Standard: 12×12 Power shuttle (wet clutch) | MFD Engagement: Electrohydraulic | Differential Lock: Mechanical
  • (MFD): 86 in. (2180 mm) / 84 in. (2132 mm)
  • Open center | Rear Remotes (Standard): 2
  • Implement Flow: 12.5 gpm (47.5 L)
  • 3-point Category and Draft Sensing Type: 1/2, Mechanical Draft Control (MDC) top link sensing
  • (2WD / MFD): 153 in. (3884 mm) / 151 in. (3838 mm)
  • MFD (Top of Cab): 98 in. (2495 mm)
  • Minimum (ROPS Folded): 77.6 in. (1972 mm)
  • Tank (Cab / Non-Cab): 23.8 gal (90 L)
  • @ 24 in. Behind Pin (Standard): 3,664 lb. (1662 kg)
  • HD 2WD or MFD with limited slip
  • Flange
  • W/o Ballast (Cab/Non-Cab 2WD): 5,622 lb. (2550 kg) / 5,027 lb. (2280 kg) | W/o Ballast (Cab/Non-Cab MFD: 6,239 lb. (2830 kg) / 5,512 lb. (2500 kg)
  • Operator Station: Cab/Non-cab | Traction: 2WD2 /MFD | Lower Link End / Stabilizer Type: Flex ends / Telescopic stabilizers
  • 4WD
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Poteau, Oklahoma
  • New
  • CASP00225
  • 2024
  • Case IH
  • Farmall Small Utility C Series 75C
  • ELRFC075JRAP00225
  • CASE IH FPT
  • 75
  • SHUTTLE
  • Diesel
  • Available
  • Minimum (ROPS Folded): 77.6 in. (1972 mm)
  • 4WD

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.